CAMEC CARAVAN MOVER - ELITE PRO 2

Part No -
043322

The Camec Elite Pro 2 allows you to move your RV at the push of a remote-control button. Both movers have aluminium rollers that engage with the tyres to make the RV wheels turn. The CamecElite Pro 2 model offers an auto-engage feature as standard, so no more bending to engage the rollers with the tyres; just press the button. The mover features soft start and stop technology toavoid jerky movements of the RV. It's now a 1-person job to put your RV in the exact spot you want it! **IMPORTANT: The previous Elite Pro model and the new Elite Pro 2 model movers are notcompatible with each other and cannot be paired together **
FEATURES
  • Manoeuvre your caravan effortlessly with soft stop & start technology
  • Accurate & durable gearing
  • 2-way communication remote control technology provides excellent anti-interference protection against other electronic signals
Find a stockist
More Information
Dimensions Part A: 740mm(l) x 320mm(w) x 440mm(d), Part B: 1490mm(l) x 260mm(w) x 90mm(d)
PDF Manual 043322_Manual.pdf
Power Operational Voltage: 12 Volt DC, Average Current Consumption: 30 Amps

PDF Manual

- NOT SUITABLE for rear shackle type suspensions- Maximum Current Consumption: 120 Amps- Speed: 11cm / sec- Safe Working Load (SWL): 2,000 kg (2 motors) up to 1,750kg on an 18% gradient. 3,000kg (4 motors) up to 2,350kg on an 18% gradient- Minimum Width (caravan/trailer): 1,800mm. Maximum Width (caravan/trailer): 2,500mm- Maximum Tyre Width: 205mm- E-coating & powder coating corrosion protection- Aluminium rollers that are friendly to tyres- Optimal compact design, reasonable ground clearance- Automatically engage or disengage the rollers by remote control- Suitable for almost any single axle chassis, as well as most caravans with a side apron. Suitable for twin axle caravans up to 2000kg- All mover components are fully protected against water spray, dirt & oil

Ask Quick Question